Alarm system installation cost in Australia is not one number. It is three: the hardware, the labour to fit it, and the monitoring that may follow. Quote only the first and the other two arrive later, usually as a surprise. This guide adds all three up, with published ranges from installer guides and fixed-price packages, so a quote can be judged instead of trusted.
Prices are Australian, checked on 15 November 2026, and every figure below is a planning figure from a published range or an advertised package — not a quote for your house. Our best home alarm system guide compares the panels these prices are built around.
Alarm system installation cost: the ranges by house size
Installer guides price by zones, and zones track house size. In the ACT, guides put a basic three-zone system at $800 to $1,400, a standard home with six to eight zones at $1,400 to $2,400, and a larger or two-storey home at $2,400 to $3,500, with each additional sensor at $90 to $180. Zone count and whether the system is wired or wireless account for most of that range.
In Western Australia, guides put a basic wired system at $700 to $1,800 supplied and installed, a standard wired system with more zones at $1,500 to $3,000, a wireless system at $1,200 to $3,500, a monitored smart system with a 4G communicator and app at $2,000 to $4,500, and a premium integrated system at $4,000 to $8,000 or more. In Melbourne, one installer puts a properly installed house alarm with keypad, siren and detectors covering the main living areas and entry points at $1,800 to $3,200, with cameras usually bringing the total to $4,000 to $6,500 for a family home.
Installer guides put a full alarm system at roughly $1,200 to $3,000, with one published example at about $2,100 upfront plus $40 a month for monitoring. Those ranges are the market; the fixed-price packages below are the sharpest single numbers in it.
Fixed-price packages: the sharpest numbers in the market
CTC Communications, a Sydney installer operating since 1993, lists fixed-price packages: a Bosch Solution 2000 fully installed at $1,020, a second Solution 2000 installed package at $1,067.33, and a touchscreen-codepad package at $1,404.38. The $1,020 package is the best-value listing — panel, sensors, communicator and programming included, with a 12-month labour warranty — and it is the figure to hold other quotes against in Sydney.
A larger Bosch Solution 6000 runs about $1,966 in one Sydney listing for an alarm plus back-to-base monitoring deal. That figure bundles hardware and a monitoring arrangement, so it is not directly comparable to the $1,020 panel-only install — read what each package includes before comparing the numbers. A quote that looks cheap because it leaves out the communicator, the programming or the warranty is not cheap.
Fixed-price packages come with conditions worth reading: the CTC packages are priced for Sydney metro, for an existing dwelling rather than a house under construction, and for standard layouts — two-storey homes, larger properties and complex installations may need a tailored quote. A house under construction needs two site visits, for cabling and fit-off, which a single-visit price does not cover.
What changes the alarm system installation cost
Five things move an installation quote. First, zones: every extra sensor is hardware plus labour, about $90 to $180 per sensor in the ACT guides. Second, wiring access: a single-storey house with an accessible roof space is the cheap job, because cables drop straight down the walls; a two-storey house, a slab-on-ground house, or solid brick internal walls cost more.
Third, the panel: a Bosch Solution 2000 is the entry wired panel, a Solution 3000 adds zones and a touchscreen, and a Solution 6000 is the large-home panel — each step up adds hardware cost. Fourth, the extras: pet-friendly detectors, app control with an IP module, a 4G communicator, and photo-verification detectors all add to the package. Fifth, the extras nobody lists: permits and safety inspections where a council requires them can add $100 to $500 to a project, and a monitored system adds a monthly subscription on top of the install.
Our alarm monitoring cost guide covers what monitoring adds. The point here is arithmetic: a $1,020 install plus $40 a month of monitoring is $2,460 over three years, not $1,020. The install price is the smallest part of a three-year total.
Alarm system installation cost: a worked example for a three-bedroom house
Take a standard single-storey three-bedroom house: front door, back door, laundry door, six ground-floor windows, a hallway and a living room. The sensor count is six to eight entry sensors and two motion sensors. Here is what the alarm system installation cost looks like three ways, using the published figures in this guide.
DIY first: an Orion kit at $215 covers two doors and two rooms, and the house needs two or three extra contact sensors at $12.98 each — about $240 to $255 all-in, with no labour and no monthly fee. The eufy 5-in-1 at $349.95 covers the same ground when it is in stock, and building from eufy parts — HomeBase 3 at $377 plus sensors at $48 each — runs past $470. The DIY total is the kit plus the sensors you need, not the headline kit price.
Professional wired second: a Bosch Solution 2000 fully installed at $1,020 in the Sydney fixed-price listing, which includes the panel, the sensors, the communicator and the programming. Add monitoring at $40 a month and the three-year total is $2,460: $1,020 of install plus $1,440 of monitoring. The published installer example at about $2,100 upfront plus $40 a month lands in the same place — $3,540 over three years — and shows why the install figure alone misleads.
Professional wireless third: a monitored smart system with a 4G communicator and app runs $2,000 to $4,500 in Western Australia guides, before monitoring. The spread is the panel, the detector count and the communicator — and the quote that looks cheap because it leaves out the communicator is the quote that grows. Whichever route you take, the worked total is the comparison: kit plus install plus three years of monitoring, written down in one place before you sign anything.
DIY vs professional: the real comparison
The DIY route is a kit price, not an install price. The Orion Smart Alarm System Kit with Keypad is $215 from Bunnings, and a three-bedroom house usually needs two or three extra contact sensors at $12.98 each, so about $240 to $255 all-in. The eufy 5-in-1 kit is $349.95 when it is in stock. There is no labour, no wait, and no monthly fee — the app alerts are free. Our DIY alarm system guide walks through the install itself.
The professional route is $1,020 and up for a wired Bosch install, and the difference is not the hardware. It is the design — zones planned for the house, not guessed at — the wiring, the programming, the certificate, and the warranty. A monitored-alarm requirement, a commercial lease, a strata rule, or an insurer demanding a graded system all need a professional install and its certificate. A house with no reliable Wi-Fi needs a wired panel with a cellular communicator. A roof space full of insulation needs someone who has done it before.
The honest comparison is not $215 against $1,020. It is a self-monitored kit you fit yourself against a monitored, certified, warranted system someone else fits. Different products, different prices, different jobs. A house that needs the second should not buy the first to save $800.
Monitoring: the cost that follows the install
Back-to-base monitoring is a separate subscription, commonly $25 to $60 a month in Australia, or $300 to $720 a year before setup and call-outs. Over a three-year term that adds $900 to $2,160, and some quotes bundle the equipment into the monthly figure so the hardware is effectively financed rather than bought. Two apparently similar offers can differ by thousands across the term.
Setup is often a separate line: a monitoring-capable configuration typically runs $500 to $1,200, and the communicator hardware can run about $200 to $800 or more for an IP or cellular unit. Patrol attendance is usually billed separately too — about $70 to $150 per activation — and fire-brigade attendance is a government charge on top of that. The install quote is the beginning of the cost, not the end of it.
Comparing quotes like-for-like
Get three quotes, and make them answer the same questions. How many zones, and which openings does each zone cover? Wired, wireless, or hybrid — and which sensors are which? Which panel, and does the price include the communicator and the programming? What is the monitoring fee, the setup cost, the contract length, and the cost of each patrol attendance? What warranty covers the labour, and for how long?
Then check the installer, not just the price. Security installation is licensed work: in Western Australia, installing, maintaining or repairing security alarm equipment for gain requires a security licence issued by WA Police, and other states have their own licensing. Ask for the licence number and check it on the register. A quote from an unlicensed installer is not a bargain — it is a system your insurer may not recognise and a monitoring provider may not connect.
Finally, read the exclusions. A quote that excludes the communicator, the app module, the second keypad, or the programming is a quote that will grow. The cheapest quote that includes everything is usually cheaper than the cheapest quote that does not. And get the quote in writing, with the itemised total and the three-year total beside it: an alarm system installation cost that is written down can be compared, and a verbal figure cannot. If two quotes differ by more than a few hundred dollars for the same zones and the same panel, the difference is in what one of them left out — find it before you sign, not after the installer has gone.
Frequently asked questions
How much does alarm system installation cost in Australia?
A basic three-zone system runs $800 to $1,400 in ACT installer guides, a standard six-to-eight-zone home runs $1,400 to $2,400, and a larger or two-storey home runs $2,400 to $3,500. A Bosch Solution 2000 fully installed is $1,020 in a Sydney fixed-price listing. Each additional sensor runs about $90 to $180 — and that is the alarm system installation cost for a standard home, before monitoring is added.
What is included in a professional alarm installation?
Usually the panel, the detectors, the siren, the communicator, the programming and a labour warranty — CTC Communications includes a 12-month labour warranty on its fixed-price packages. Monitoring, extra sensors, app modules and permits are often separate line items, so ask for an itemised quote.
Is DIY alarm installation cheaper than professional installation?
The kit is cheaper — an Orion kit is $215 from Bunnings against $1,020 and up for a professionally installed Bosch panel. But the products differ: DIY is self-monitored with no certificate or warranty, while professional installation brings design, wiring, programming, certification and a warranty. A house that needs a monitored or graded system should not buy DIY to save the difference.
Does installation cost include monitoring?
Usually not. Monitoring is a separate subscription, commonly $25 to $60 a month, and setup of $500 to $1,200 is often a separate line too. A three-year term adds $900 to $2,160 of monitoring to the install price, so compare the three-year total, not the install figure alone.
Do I need a licensed installer for a home alarm in Australia?
For professional installation, yes — security installation is licensed work, and the rules vary by state. In Western Australia a security licence issued by WA Police is required. Ask for the licence number and check it on the register before you accept a quote.
Prices checked 15 November 2026 from The Quote Yard, CTC Communications, Castle Security and Australian installer guides. Planning figures, not quotes. External price source: The Quote Yard alarm installation costs, ACT.
